VMB2BL - Velbus 2 Channel Electric Blind / Shutter Motor Control Module

The VMB2BL Velbus 2 Channel Electric Blind / Shutter Motor Control Module can be used to control two electrically controlled roll-down shutters, sunblind's, etc. using the VELBUS control system.

• suppressed relay contacts
• manual control on the module
• controllable by connecting several push buttons in parallel
• control through VELBUS
• programmable without PC
• easy learning process
• learned push buttons are saved in case of a power failure
• reporting towards the control modules
• 4 possible switching times per channel: 15s - 30s - 1min - 2 min
• LED indicators for:
  • UP and DOWN relay outputs
  • UP and DOWN operation modes
  • power voltage
  • data reception and forwarding through VELBUS

• relay contacts: 16A/230Vac max.
• push button input debounce: 65ms
• 245 possible addresses
• power supply: 12 ... 18VDC
• consumption: 200mA
• standard DIN-rail housing: 4 modules
• dimensions: 90 x 71 x 58mm / 3.6 x 2.8 x 2.3"
• weight: 200g (0.43lbs)

• application example (English)
• long version: vmb2bl_uk_rev2
• short version (version 2): User Manual_vmb2bl_rev2
• protocol (rev.3): protocol_vmb2bl

• Velbus software
  Version 6.0
  Version 7.1 (Beta)
  
• Introduction to home automation
  Velbus Automation System
• Velbus Catalogue