VMB1DM - Velbus AC Lights Dimmer Module

The VMB1DM Velbus AC Lights Dimmer Module is suitable for light bulbs, halogen on mains and low-mains halogen in combination with a dimmable electronic transformer.

Phase cut-off technology for resistive (light bulbs) and capacitive (dimmable electronic transformers) loads.
Phase cut-off technology for inductive loads (dimmable wound transformers).

Features

Noiseless through CoolMOS™ FET
mains pollution (EMI) conform EN55015
Built-in non-resettable fuse
gradual switch on or off a. will prolong the lamp's life
manual control on the module
control through VELBUS
programmable without PC
16 possible time set-ups: momentary - 5s - 10s - 15s - 30s - 1min - 2 min - 5min - 10min - 15min - 30min - 1u - 2u - 5u - 1day - on/off
controllable by connecting several push buttons in parallel
easy learning process
storage space for 16 different push buttons
learned push buttons are saved in case of a power failure
report to control modules
LED indicators for:
- operation modes
- power voltage
- data reception and forwarding through VELBUS
operation modes:
- moment control
- start/stop timer
- staircase lighting timer
- dimmer
- simmer with memory function
- multi-position dimmer
- slow-on dimmer
- slow-off dimmer
- slow on-off dimmer
control possibilities:
- push buttons turning on the lamp to full intensity
- push buttons turning the lamp off
- push buttons turning on the lamp to full intensity or turning off the lamp
- push buttons activating the set operation mode
- push buttons increasing the lamp's light intensity
- push buttons decreasing the lamp's light intensity
- push buttons creating atmospheric lighting
- push buttons turning on the lamp on the desired intensity.