K8091 - LED Clock With Slow On Dimmer KIT

Sorry Discontinued

The K8091 LED Clock With Slow On Dimmer SELF-ASSEMBLY electronic kit is not only an attractive LED clock but it also features control for an external nightlight.

From 15 minutes before the set time, the light intensity of the connected light will increase up to full power at set time and beeps will be heard. The beep length is gradually built up so you will not be startled by a sudden alarm signal.

Please note that kit is supplied with EU 2-pin mains connectors as depicted so you will need to supply your own UK equivalents.

• clock with red 7-segment display
• possibility to connect any lamp armature fitted with a light bulb
• sleep function (15 min) for slow light power-off
• snooze function with alarm repeat function after 8 min.
• manually settable light intensity
• beep and / or light option

• power supply: 220- 240V AC / 50Hz.
• lamp power: 40 ~ 100W max.
• power consumption: < 1W (without lamp)
• dimension: 92 x 45 x 101mm / 3.6 x1.8 x 3.9"
• Product format: SELF-ASSEMBLY electronic kit (KT more)
• WARNING! This product operates at potentially lethal mains voltage. Installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children.
  more

• User Guide
• User Manual
• User Manual (NL - FR - DE - ES)