K8004 - DC To Pulse Width Modulator KIT (8-35V, 6.5A)

The K8004 DC To Pulse Width Modulator self-assembly electronic construction kit is control circuit is ideal for the accurate control of DC motors, lighting levels, small heaters as well as other applications.

The circuit converts a DC voltage into a series of pulses, such that the pulse duration is directly proportional to the value of the DC voltage. The great advantage of such a circuit is that almost no power is lost in the control circuit. Protected against overload and short circuit.

PRODUCT SELECTION NOTES: The motor controller should have an output load capacity at least 25% above the motors peak power requirement. Please do NOT rely on motor rating plates for power consumption figures as they often quote average not peak power. You should verify the actual peak power at start-up and under full load before selecting an appropriate size motor controller.

• power supply: 8 to 35VDC
• maximum output current: 6.5A
• input voltage: between 2.5 and 35VDC
• dimensions: 85 x 48 x 45mm (3.4" x 1.9" x 1.8")
• Product format: SELF-ASSEMBLY electronic construction kit (KT more)

• Connection Diagram: K8004 internal volt
• Connection Diagram: K8004 with k8000
• Connection Diagram: K8004 separate voltage
• Illustrated Assembly Manual k8004_rev3
• Assembly Manual k8004