K6714 - Universal Relay Card Kit (8 Relays)

The K6714 Universal Relay Card (8 Relays) SELF-ASSEMBLY electronic kit is ideal if you want to switch large electric currents using an electronic control and require control isolation at the same time.

Board power by 125-230Vac mains. Power supply transformer is included. Provides a 12V DC output that can be used as a power supply for other kits: K6714, K8023,... Every output of the print can be equipped with a noise suppressor network.

It provides 16 channels but components to populate only the first 8 channels are provided (see Order Code K6714-16 for a fully populated version of this product).

• 8 relays included (extendible to 16)
• the relays can be controlled in different ways:
• direct control from open-collector outputs, TTL or CMOS level
• other kits like K8000, K8023, K6711, ...
• contact: 1 x inverter: 10A / 28VDC or 125VAC, max. 5A at 230VAC
• relay switch-over contact: max. 5A at 220V

Specifications

• output voltage: 12V / 250mA for power supply
• power supply: 220 or 115VAC / 12VA
• PCB dimensions: 150 x 212mm (5.9" x 8.4")
• recommended housing: WCAH2507
• Product format: SELF-ASSEMBLY electronic kit (KT more)
• WARNING! This product operates at potentially lethal mains voltage. Construction, installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more

• Connection Diagram K6714 with K6711
• Connection Diagram K6714 with K8023
• Connection Diagram K6714 with K8046
• Assembly Manual (English)
• Assembly Manual (Multilingual)