K4600 - Video and RGB Converter/Processor KIT

The K4600 Video and RGB Converter/Processor SELF-ASSEMBLY electronic kit. To process a PAL colour video signal it first has to be converted back into the original Red, Green and Blue signals.

This allows the colours to be adjusted separately along with the colour intensity, brightness and contrast. Once processed the signal can be converted back into a PAL video signal. The user can choose PAL video or RGB output.

In addition space is provided on the PCB for a UHF modulator (our type RFMOD) so you can use the antenna input of your TV or video. An SVHS input signal can also be connected.

• colour system: PAL (CCIR)
• controls for brightness, contrast and saturation
• separated controls for Red, Green and Blue
• composite video input (RCA-connector)
• RGB input (option)
• input level: 1Vpp
• input impedance: 75 ohm
• composite video output (RCA-connector)
• RGB-output: 9-pin SUB-D
• output level: 1Vpp
• output impedance: 75 ohm
• housing included
• power supply: 16VDC / 0.5A unregulated
• PCB dimensions: 170 x 140mm (6.7" x 5.5")
• dimensions: 200 x 67 x 170mm (7.9" x 2.6" x 6.7")
• Product format: SELF-ASSEMBLY electronic kit (KT more)

• K4600 Connection Diagram: video source for use with the video & RGB processor
• K4600 Connection Diagram: To receive the video signal using the RGB output of the video & RGB processor
• K4600 Connection Diagram: to receive the video signal for use with the video & RGB processor
• K4600 Connection Diagram: between the video & RGB processor and the video digitizer (K8100)
• K4600 Connection Diagram: Video & RGB processor with a normal video source and video destination
• K4600 Connection Diagram: Video & RGB processor connected to a video source and to the video digitizer (K8100)