SDV004 - Step Down Voltage Converter (230Vac - 120Vac, 100W)

This voltage converter enables a 120Vac device (i.e. one designed to work in the US) to be powered from British 230Vac mains. Maximum rating is 100 Watts.

Power input lead is fitted with a standard British 3-pin plug.

The picture right shows the 120Vac US style 3-pin output socket. This can be used with the 2-pin flat bladed plugs shown or 3-pin plugs (2 flat pins and the round centre earth pin). The centre earth pin is wired to the earth pin on the UK plug. Click on the picture for a bigger view.

Suitable for powering electrical equipment such as portable TVs, videos, lamps, small pumps and battery chargers, etc. Equipment with an inductive loads like motor driven appliances (electric drills, fridges, freezers, etc.) can have considerably higher start-up/load currents than their rated value would indicate. Please ensure the peak load does not exceed the converters maximum capacity.

• Input voltage: 230Vac, 50Hz mains
• Output Voltage: 120Vac
• Maximum Load: 100 Watts (~900mA)
• The earth pin in the output socket is physically wired to the earth pin in the UK plug
• Dimensions: 115 x 84 x 69mm
• For indoor use only

NB This product is NOT suitable for use in North America and most European countries. It is designed for use with 230Vac mains and BS1363 Standard 3-pin style mains sockets (see picture) as used in United Kingdom, Ireland, Hong Kong, Malaysia and Singapore. It is probably best to obtain a power supply locally if you live outside this countries.