RPI566 - 1000W Power Inverter (12Vdc to 230Vac)

Regulated 1000 Watt power inverter for 230Vac equipment via a 12V car or boat battery. This High performance (> 90%) power inverter generates very little heat and has a high stability output frequency.

Suitable for powering electrical equipment such as portable TVs, videos, lamps, small pumps and battery chargers, etc. We recommend the SSI638 or SSI641 for inductive loads like motor driven appliances (electric drills, fridges, freezers, etc.) as these can have considerably higher start-up/load currents than their rated value would indicate. The inverter will NOT operate high wattage appliances or equipment that produce heat, such as hair dryers, microwave ovens and toasters.

This inverter generates a modified sine wave, which is suitable for powering most equipment and is considerably superior to the square waves which are produced by most other inverters.

• Reverse polarity protection
• Battery high/low shutdown
• Short circuit and overload protection
• Thermal protection
• Fan cooled
• Supplied with 0.75m length DC power leads fitted with ring terminals
• Includes 6 x 25A spare fuses
• Modified sine wave output

Technical Specifications
Continuous power	1000W Maximum
Peak power	2000W Maximum
Output voltage	230Vac
AC frequency	50Hz (±1%)
Input Voltage	12Vdc Nominal (10 -16Vdc)
Current Consumption	104 Amps Maximum
Efficiency	90%
Dimensions	310 x 136 x 80mm
Weight	2.43kg

• Power Inverter Selection Guide
• NB This voltage inverter is NOT suitable for use in North America