1/3" Monochrome Camera Module (Omnivision OV7411)

Monochrome camera module using the OV7411 image sensor that provides advance CMOS mixed signal technology, an integrated image array, signal processing, timing and control circuitry, all on a single chip, enabling all aspects of B/W video camera applications.

This camera is supplied with a f3.7mm, F2.0 FOV 65° x 50° (wide FOV) lens as standard.

• See M3185A Data Sheet for full camera details
• View OV7411 Datasheet
• View OV7411 Schematic Diagram

Features

• Small in Size (PCB only 29x29mm)
• 365K pixel
• Wide 8-15Vdc operating voltage range (Order Code PSU445 with connector 778.106)
• Low power consumption (<200mW>
• Direct connect to standard video monitor/TV
• On chip auto exposure
• Back light compensation
• Gamma correction
• Auto gain control
• Auto black level calibration
• Only 3 connections (PWR, GND, Video Out)

Specification

• Imager: OV7411 CMOS monochrome image sensor
• Effective image area: 5.78 x 4.19mm (CCIR)
• Scanning: 2:1 interlace
• Shutter: 1/60 to 1/10,000 sec
• Output: 1V p-p composite video (75 Ohm)
• Picture Element: CCIR - 628 x 582 (365K pixels), EIA 510 x 492 (251K pixels)
• S/N Ratio: >48dB (AGC on)
• Sensitivity : 0.2Lux at f1.2
• Resolution: >400 TV Lines
• Supply Voltage: 8-15Vdc
• Lens: f=3.7mm, F=2.0
• Overall Dimensions (mm): 29W x 29D x 30H approx
• Weight: 10 grams approx.

Versions

Model # M3185A-CCIR is the 50Hz version used in the UK and most other countries. Model # M3186A-EIA is the 60Hz version for north America only. Both versions are supplied with an f3.7 lens as standard.