CTL001 - RF Remote Control Modules (1 Channel)

	CTL001/CTL007
	CTL003/CTL009
	CTL005
	CTL011

This range of 433.92MHz single channel RF remote control modules allows you to select from a variety of receiver board and transmitter options to suit your needs.

There are 4 receiver module options offering 12Vdc or 230Vac supply voltages and either Standard or Toggle control of a single 3A mains rated relay outputs (NO, NC, C). These are designed to receive and decode signals sent by a choice of either 30m or 100m range transmitters modules.

The Standard Receiver modules activate the relay output at the push of the corresponding transmitter button and disconnect when the button is released.

The Toggle Receiver modules activate the relay output at the first push of the corresponding transmitter button and will only disconnect after a second push of the button.

The mains powered receiver boards have an onboard buzzer that provides an audible confirmation of key presses received.

Any number of transmitters and receivers can be set to either accept or ignore other modules within range using the 13,122 security code combinations.

The modules have in-built micro-switches to select security code, antenna output, LED relay status indicators.

Please see User Manual links in table below for full details.

See also 2 Channel RF Remote Control Modules and 4 (8) Channel RF Remote Control Modules.

• Supplied in as a fully assembled module
• Suitable power supply for 12V units: Order Code PSU446 with connector 778.106 or kit 1061
• WARNING! Some of these products operate at potentially lethal mains voltage. Installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more

Order Code	Description	Dimensions (mm)	Enclosure	User Manual
CTL001	1 Channel Standard Relay Receiver (12Vdc)	82 x 50 x 30	WCAH2853
CTL007	1 Channel Toggle Relay Receiver (12Vdc)	92 x 50 x 30	WCAH2853
CTL003	1 Channel Standard Relay Receiver (230Vac)	108 x 56 x 30	WCAH2853
CTL009	1 Channel Toggle Relay Receiver (230Vac)	108 x 65 x 30	WCAH2851
CTL005	1 Channel Remote Control Transmitter (30m)	57 x 38 x 16	Included
CTL011	1 Channel Remote Control Transmitter (100m)	90 x 60 x 24	Included