CT0011 - TRIAC Board Module (8-Channel Isolated IO)
8
channel opto-isolated IO board with triac output for controlling resistive
ac mains loads (e.g. lamps, resistors, etc). The optocouplers electrically isolate the
control signal of each input from the corresponding triac output.
The inputs accept any trigger signal between 3 and 24V dc and the corresponding output will be activated and maintained till the input voltage decreases to zero. The maximum load for each output is 230Vac/500 Watts. All outputs are fed from a common power supply input.
Reverse polarity protection. Screw terminal blocks for all connections.
This module is NOT suitable for use with inductive loads (like transformers, neon lamps, halogen lamps with transformer, motors, pumps, etc).
| Technical Specifications | |
|---|---|
| Inputs | 8 x 3 - 24V dc opto-isolated |
| Outputs | 8 x Triac |
| Output Voltage | 230V ac |
| Minimum Output Load | 50 Watts |
| Maximum Output Load | 500 Watts |
| Electrical Isolation | 1500V ac max. |
| Board Dimensions | ~ 107 x 200 x 20 mm |
| Board Connections | Screw terminal blocks |
| Product Format | Pre-Assembled electronic module |
| Documentation |
 User
Manual |
| Product Code |
Description | Price each exc. VAT (GB Pounds £) | INC.
VAT each 1+ |
Quantity | |
|---|---|---|---|---|---|
| 1+ | 5+ | ||||
CT0011 |
Triac Board Module (8-Channel Isolated IO) |
£59.53 | £50.60 | GB£69.95 | |
Please see our Electronic controller Boards page for more products like this
