CR0016 - 4 Output Cyclical Night/Day Lighting Controller (230Vac/50Hz, 500W)

The 4-Output Cyclical Night/Day Lighting Controller provides a continuous virtual-day simulation effect (Dawn-Day-Dusk-Night) for use in a variety of applications including nativity scenes, models, hydroponics', poultry farming, etc.

Four 500 Watt outputs provide control of lighting based on different periods of the day:

• Output A: Daybreak>DAY>Nightfall
• Output B: Nightfall>NIGHT>Daybreak
• Output C: Auxiliary DAY
• Output D: Auxiliary NIGHT
• Operating Cycle and Output State Diagram (Click to enlarge)

Each output can be used to power a different lighting circuit and thus provides great flexibility for producing virtual day and night scenes in models, etc.

The length of time for the Daybreak/Nightfall cycles is user adjustable between 1 Second and 120 Minutes thus providing a gradual transition in lighting intensity for both outputs A and B. As output A is progressively turning on, output B will be progressively turning off and vice versa.

The duration of the Day/Night cycles is also user adjustable between 1 Second and 120 Minutes.

The shortest duration one "day" can be set to is 4 seconds and the longest day duration possible is 8 hours.

The Auxiliary Outputs are active during the respective Day or Night part of the cycle.

The Start Point setting allows selection of the desired initial state (either Daybreak, Day, Nightfall or Night) when power is applied

The module is supplied fully assembled and has an onboard safety fuse. All you need to do is house it in a suitable enclosure, add the wiring, output fuses and lights.

Not suitable for use with inductive loads like neon, transformers, PL lamps, etc

Technical Specifications
Operating Voltage	230Vac/50Hz mains (the interference filter mentioned in the User Manual is optional and is not necessary in most installations)
Maximum Load (per output)	500 Watts
Minimum Load (per output)	50 Watts
Ramp Time Adjustment	1-120 Seconds or 1-120 Minutes
Solid Time Adjustment	1-120 Seconds or 1-120 Minutes
Dimensions	118 x 101 x 25 mm
Enclosure	WCAH2852
Product Format	PRE-ASSEMBLED Electronic Module more
Documentation	User Manual
WARNING!	This product operates at potentially lethal mains voltage. Installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more