CR0015 - 2 Output Cyclical Night/Day Lighting Controller (230Vac/50Hz, 500W)

The 2-Output Cyclical Night/Day Lighting Controller provides a continuous virtual-day effect (Dawn-Day-Dusk-Night) for use in a variety of applications including hydroponics', poultry farming, nativity models, etc.

The length of time for the daybreak/nightfall cycles is user adjustable between 1 Second and 120 Minutes thus providing a gradual transition in lighting intensity.

The duration of the Day/Night cycles is also user adjustable between 1 Second and 120 Minutes.

The primary output can power up to 500W of incandescent light bulbs and provides a virtual day simulation that continuously repeats whilst the module is powered. The shortest duration one "day" can be set to is 4 seconds and the longest day duration possible is 8 hours.

A second Auxiliary Output is supplied that can be set to activate during either the Day or Night part of the cycle. This can be used to power a secondary lighting circuit up to 500W.

The following adjustments/controls are available to the user:

• dusk/dawn transition period (Ramp) settable from 1-120 Seconds or 1-120 Minutes
• day/night period (Solid) between 1-120 Seconds / 1-120 Minutes

The module is supplied fully assembled and has an onboard safety fuse. All you need to do is house it in a suitable enclosure, add the wiring, output fuses and lights.

Not suitable for use with inductive loads like neon, transformers, PL lamps, etc

Technical Specifications
Operating Voltage	230Vac/50Hz mains (the interference filter mentioned in the User Manual is optional and is not necessary in most installations)
Maximum Load (per output)	500 Watts
Minimum Load (per output)	50 Watts
Ramp Time Adjustment	1-120 Seconds or 1-120 Minutes
Solid Time Adjustment	1-120 Seconds or 1-120 Minutes
Dimensions	101 x 77 x 25 mm
Enclosure	WCAH28531
Product Format	PRE-ASSEMBLED Electronic Module more
Documentation	User Manual
WARNING!	This product operates at potentially lethal mains voltage. Installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more