CR0014 - Touch Plate Mains Light Dimmer Module (230Vac, 500W)

The Touch Plate Mains Light Dimmer Module (230Vac, 500W) can be used to control lighting using a simple touch plate (not included). A single finger can be used to turn lights on/off and adjust the brightness level from fully on to fully dimmed.

Useful memory feature will return the lights to their previously set brightness level when turned off and back on again. Adjustment time from fully on to fully dimmed is 5 seconds whereupon it will cycle back to fully on.

The module is supplied fully assembled. All you need to do is house it in a suitable enclosure and connect mains, contact plate and lights.

Not suitable for use with inductive loads like neon, transformers, PL lamps, etc

Technical Specifications
Operating Voltage	230Vac mains
Current consumption	60mA
Output  Load	500 Watts maximum
Output Load (Minimum)	50 Watt minimum
Brightness Memory	Yes - Last selected position memory
Adjustment Time (On/Off)	5 Seconds
Dimensions	67 x 50 x 20 mm
Product Format	PRE-ASSEMBLED Electronic Module more
Documentation	User Manual
WARNING!	This product operates at potentially lethal mains voltage. Installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more