CI0101 - 230Vac Delay Timer Relay Module (1 to 180 Second)

1 second to 3 minute delay timer module with a mains rated relay output. The relay will stay on until the time period has elapsed. The time delay is fully adjustable using an on-board potentiometer.

The timer is activated using a simple contact closure. The timer will complete the preset timing period regardless of further trigger signals or if the contacts remain closed after activation. Once finished, a fresh trigger signal is needed to start a new timing period.

A jumper also allows the timer to commence counting when the power supply is attached.

An LED indicates that the timer is in operation.

Technical Specifications
Operating Voltage	230Vac mains
Current Consumption	30mA min. - 85mA max.
Output	1 x SPDT Relay
Maximum Output Load	5 Amps @ 250Vac max.
Relay Connections	C, NO, NC (Relay FAQ)
Dimensions (HxWxD)	~ 84x55x30 mm
Product Format	Pre-Assembled electronic module
Documentation	User Manual

• WARNING! This project kit operates at 230Vac mains voltage. It's construction, testing and use should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Kit must be fitted into a suitable enclosed box before operating. more