CI0080 - PIR Sensor Timer/Flip-Flop Relay Module

PIR sensor movement detector with relay output. The onboard mains rated relay is activated when movement is detected. The relay-on duration can be user-set between 1 second and 5 minutes, or it can operate in flop flop mode.

The detection range is up to 5 metres. The board has a Reset input (contact closure) that deactivates the relay in any operation mode for as long as the input remains closed. In flip-flop mode, when the output is activated it will remain in this state until the Reset input is used to reset the module or power is removed.

An LED indicates the relay status. The board is reverse polarity protected. Screw terminal blocks for all connections. Can be installed into a DIN-RAIL Ref. C-7562.

Technical Specifications
Detection Range	5 metres
Operating Voltage	12Vdc (e.g. Order Code PSU446 with connector 778.106 or CFE103)
Current Consumption	8mA Min, 75mA max.
Power-on Warm-up Delay	25 seconds
Relay-on Time Scales	1 - 25 Seconds 3 Seconds - 5 Minutes
Output	1 x SPDT Relay
Maximum Output Load (Resistive)	5 Amps @ 230Vac max.
Relay Connections	NO, NC, C (Relay FAQ)
Dimensions (HxWxD)	72 x 42.5 x 30 mm
Enclosure	WCAH2853
Product Format	PRE-ASSEMBLED Electronic Module more
Documentation	User Manual CE Certificate