CI0055 - 8 Channel Sequential Controller Relay Module

This module has 8 relay outputs that operate sequentially using a choice of manual or automatic triggering. With each trigger signal the module receives, the relays are individually activated (stepped) in sequence. As the next relay activates, the previous relay will turn off and when the last one has activated, the process will start again from the first relay.

In Manual mode the relays are triggered by external impulses (a simple contact closure or 12Vdc pulse).

In Automatic mode the relays automatically and continuously step through the sequence (starting from relay 1) when the module is powered up. The "step" time period can be adjusted between about 0.3 and 10 seconds.

A Reset input (contact closure operation) returns the current sequence to the Relay 1 position. It will remain at this position until the Reset input is released.

The module has no memory function and will always start from the relay 1 position when first activated.

The module includes protection against inverse polarity, indicator output LED and connection terminals. Requires external 12V dc power supply  (Order Code PSU445).

Please see Order Code CI0005 for a 4 channel version of this product.

Technical Specifications
Power Supply	12V dc  (Order Code PSU445)
Current Consumption	60mA max
Maximum Input Frequency (External Clock)	25Hz
Minimum Connection Time per Relay	~ 0.3 Seconds
Maximum Connection Time per Relay	~ 10 Seconds
Output	8 x SPDT Relay
Maximum Output Load	5 Amps @ 230Vac max.
Relay Connections	NO, NC, C (Relay FAQ)
Protection against Inverse Polarity	Yes
Dimensions (WxHxD)	155x22x100mm
Board Connections	Screw terminal blocks
Product Format	Pre-Assembled electronic module
Documentation	User Manual

• Suitable power supply: Order Code PSU445 with connector 778.106 or kit 1061