CI0041 - Photocell Lighting Controller Module (230Vac, 250W)

230Vac automatic mains light switch with triac output capable of driving resistive loads up to 250W.

The output is activated when the light level falling on the onboard detector drops below a user set threshold. The output is deactivated when the light level increases again.

Applications: Automatically turn on electric lights or other resistive loads when ambient light falls below a pre-set level.

• Detector is mounted on the board
• User adjustable sensitivity using onboard trimmer
• Small size
• TRIAC output provides full AC waveform
• Screw terminal blocks for all connections
• Suitable for resistive loads only
• See Order Code 1072 for an alternative kit version

Technical Specifications
Minimum detection level	25 Lux
Maximum detection level	130 Lux
Operating Voltage	230Vac, 50Hz mains
Power Consumption (Max)	~ 3 Watts
Output Load	Resistive loads only
Output Load (Minimum)	50 Watts
Output Load (Maximum)	250 Watts
Dimensions (HxWxD)	30 x 30 x 30mm
Board Connections	Screw terminal blocks
Product Format	PRE-ASSEMBLED Electronic Module more
Documentation	User Manual
WARNING!	This product operates at potentially lethal mains voltage. Installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more