CI0019 - 230Vac Delay Timer TRIAC Module (2 to 45 Minute)

2 to 45 minute delay timer module with a triac output for controlling resistive ac mains loads (e.g. lamps, resistors, etc). The output will stay on until the time period has elapsed. The time delay is fully adjustable using an on-board potentiometer.

The timer is activated using a simple contact closure. The timer will complete the preset timing period regardless of further trigger signals or if the contacts remain closed after activation. Once finished, a fresh trigger signal is needed to start a new timing period.

The board also offers an "Instant-On" mode that disables the trigger input. Instead the timer activates the relay and commence the delay countdown immediately power is applied . The relay will stay on until the user-set time period has elapsed. The power must be removed and reapplied for a fresh countdown to commence. 

This module is NOT suitable for use with inductive loads (like transformers, neon lamps, halogen lamps with transformer, motors, pumps, etc). See relay output version instead (Order Code CI0102).

Technical Specifications
Operating Voltage	230Vac mains
Current Consumption	1 Watt
Output	1 x triac
Output Voltage	230V ac
Minimum Output Load	50 Watts
Maximum Output Load	500 Watts
Dimensions (HxWxD)	~ 119x55x30 mm
Product Format	Pre-Assembled electronic module
Documentation	User Manual
WARNING!	This product operates at 230Vac mains voltage. Connection, testing and use of the product should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Product must be fitted into a suitable enclosed box before operating. more