CI0018 - 230Vac Delay Timer TRIAC Module (1 to 180 Second)

1 second to 3 minute delay timer module with a triac output for controlling resistive ac mains loads (e.g. lamps, resistors, etc). The output will stay on until the time period has elapsed. The time delay is fully adjustable using an on-board potentiometer.

The timer is activated using a simple contact closure. The timer will complete the preset timing period regardless of further trigger signals or if the contacts remain closed after activation. Once finished, a fresh trigger signal is needed to start a new timing period.

A jumper also allows the timer to commence counting when the power supply is attached.

This module is NOT suitable for use with inductive loads (like transformers, neon lamps, halogen lamps with transformer, etc).

Technical Specifications
Operating Voltage	230Vac mains
Current Consumption	1 Watt
Output	1 x triac
Output Voltage	230V ac
Minimum Output Load	50 Watts
Maximum Output Load	500 Watts
Dimensions (HxWxD)	~ 119x55x30 mm
Board Connections	Screw terminal blocks
Product Format	Pre-Assembled electronic module
Documentation	User Manual

• WARNING! This project kit operates at 230Vac mains voltage. It's construction, testing and use should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Kit must be fitted into a suitable enclosed box before operating. more