CI0001 - 12Vdc Delay Timer Relay Module (1 to 180 Second)

1 second to 3 minute delay timer module with a mains rated relay output. The relay will stay on until the time period has elapsed. The time delay is fully adjustable using an on-board potentiometer.

The timer is activated using a simple contact closure. The timer will complete the preset timing period regardless of further trigger signals or if the contacts remain closed after activation. Once finished, a fresh trigger signal is needed to start a new timing period.

The board also offers an optional "Instant-On" mode that disables the trigger input. Instead the timer activates the relay and commence the delay countdown immediately power is applied . The relay will stay on until the user-set time period has elapsed. The power must be removed and reapplied for a fresh countdown to commence.

An LED indicates that the timer is in operation. The board is reverse polarity protected.

A mains powered version of this board is available (Order Code CI0101)

Technical Specifications
Operating Voltage	12V dc (e.g. Order Code PSU445)
Current Consumption	50mA
Output	1 x SPDT Relay
Maximum Output Load	5 Amps @ 230Vac max.
Relay Connections	NO, NC, C (Relay FAQ)
Dimensions (HxWxD)	~ 30 x 75 x 43 mm
Product Format	Pre-Assembled electronic module
Documentation	User Manual

• Suitable power supply: Order Code PSU445 with connector 778.106 or kit 1061