This range of pre-assembled professional hi-fi mono audio amplifier modules offers up to 100W RMS power. Each benefits from reduced distortion and high sound quality. Short circuit protected.
A range of suitable power supplies is also available.
All modules are supplied fully assembled and tested with instructions so you only need to make the necessary connections.
| Technical Specifications | ||
|---|---|---|
25W RMS Amplifier |
|
|
| Operating Voltage | 42V dc symmetrical | |
| Current Consumption | 1A | |
| Power Supply Order Code | CFS005 | |
| Input Signal | 700mV | |
| Frequency Response | 20Hz - 20kHz | |
| Input Impedance | 47K Ohm | |
| Output Impedance | 4-8 Ohms | |
| Dims. (HxWxD) mm | 38x112x70 | |
35W RMS Amplifier |
|
|
| Operating Voltage | 28V dc symmetrical | |
| Current Consumption | 1.25A | |
| Power Supply Order Code | CFS006 | |
| Input Signal | 700mV | |
| Frequency Response | 20Hz - 20kHz | |
| Input Impedance | 47K Ohm | |
| Output Impedance | 4-8 Ohms | |
| Dims. (HxWxD) mm | 38x112x70 | |
60W RMS Amplifier |
|
|
| Operating Voltage | 32V dc symmetrical | |
| Current Consumption | 1.5A | |
| Power Supply Order Code | CFS007 | |
| Input Signal | 700mV | |
| Frequency Response | 20Hz - 20kHz | |
| Input Impedance | 47K Ohm | |
| Output Impedance | 4-8 Ohms | |
| Dims. (HxWxD) mm | 110x110x70 | |
100W RMS Amplifier |
|
|
| Operating Voltage | 42V dc symmetrical | |
| Current Consumption | 2.2A | |
| Power Supply Order Code | CFS008 | |
| Input Signal | 700mV | |
| Frequency Response | 20Hz - 20kHz | |
| Input Impedance | 47K Ohm | |
| Output Impedance | 4-8 Ohms | |
| Dims. (HxWxD) mm | 85x110x70 | |
180W RMS Amplifier |
|
|
| Operating Voltage | 50V dc symmetrical | |
| Current Consumption | 2.5A | |
| Power Supply Order Code | CFS009 | |
| Input Signal | 700mV | |
| Frequency Response | 20Hz - 20kHz | |
| Input Impedance | 47K Ohm | |
| Output Impedance | 4-8 Ohms | |
| Dims. (HxWxD) mm | 210 x 100 x 68 | |
Please see our Audio Amplifiers page for more products like this

