C-CAM2A - ¼" Miniature Monochrome Camera Module (OV5116)

It uses a high quality OV5116 Omnivision sensor and can be connected directly to a standard video monitor.

C-CAM2A turns a complete video camera into a component of your product and is specially designed for cost sensitive consumer electronics applications.

• C-CAM2A Data Sheet

Features

• Small in size, DIL package (0.3in)
• Low power consumption (<100mW)
• Available for CCIR/EIA standard
• Direct connect to standard video monitor/TV
• On chip auto exposure
• Back light compensation
• Gamma correction
• Auto gain control
• Auto black level calibration

• Imager: OV5116 ¼" CMOS image sensor
• Scanning: 2:1 interlace
• Shutter: 1/60 to 1/10,000 sec
• Video Output: 1V p-p composite video (75 Ohm)
• Picture Element: 352 x 288 (101,376 pixel)
• Effective image area: 3.2 x 2.5mm
• S/N Ratio: >46dB (AGC on)
• Sensitivity: =0.5 Lux at F1.4
• Resolution : >260TV lines
• Lens: f=4.9mm F=2.8, FOV 36° x 27° (pin hole)
• Supply Voltage: 5±0.5 Vdc (Order Code AS30A34-5 is suitable)
• Weight: 2.9 grams

Applications

Visual Door Phone, Video conferencing, Security system, Toys and Models

Versions

Model # C-CAM2A-CCIR is the 50Hz version used in the UK and most other countries. Model # C-CAM2A-EIA is the 60Hz version for north America only. Both versions are supplied with an f4.9 lens as standard.