4061 - Phono/Microphone Preamplifier Unit
A
low-noise / high-gain hi-fi quality stereo preamplifier specially for use with
turntables with magnetic cartridges, or with microphones to be connected to
any amplifier or computer soundcard without signal loss or deterioration.
Supplied ready assembled in a strong metal case with a mains to DC power
adapter.
- Amplifies signal from low current phono or microphone sources
- MIC/Phono switch
- Suitable for stereo microphones or 2x mono microphones
- High gain, low noise
- Input connections: 1 x 6.35mm stereo jack, 1 x 6.35mm mono jack and
L+R phono
| Technical Data |
| Input Impedance |
: |
50K Ohm |
| Input Level |
: |
0.5mV Mic Mode / 3mV Phono mode |
| Gain |
: |
50 dB Mic Mode / 34 dB Phono mode |
| S/N Ratio |
: |
>48 dB Mic Mode / >55 dB Phono mode |
| Freq. Response (Mic mode) |
: |
+ 1 dB to - 3 dB 70Hz - 20kHz |
| Equalisation (Phono mode) |
: |
RIAA +1 to -3dB 30Hz - 20KHz |
| Output Level |
: |
150mV RMS |
| Load Impedance |
: |
>10K Ohm |
| Overload Margin |
: |
23 dB |
| Crosstalk |
: |
55 dB |
| Supply voltage |
: |
12-15Vdc 100mA (230Vac mains adapter supplied) |
| Dimensions (WxHxD) |
: |
134x38x70mm |
