3166v2 - Bidirectional DC Motor Speed Controller (5-32V dc)

Controls the speed of a DC motor in both the forward and reverse direction, from fully OFF to fully ON in either direction, using a single potentiometer. Uses pulse width modulation for maximum motor torque.

This system eliminates the danger of damage to both the control board and motor that is associated with sudden voltage reversals possible in boards that have just a simple DPDT polarity switch. With our controller, turning the pot in one direction causes the motor to start spinning. Turning the pot in the other direction causes the motor to spin in the opposite direction.

Specifications
Voltage: The kit and motor use the same power supply. Since the maximum operating voltage of the MOSFETs is 32V dc then this is also the maximum voltage available to run the motor.

Current: The maximum current for this board (as supplied) is 10A. This is governed by the PCB tracks that run from the MOSFETs pins to the screw terminal blocks and the size of the heatsinks supplied. This can however be increased by soldering wire links along the PCB tracks. You would also need to improve the heatsinks/cooling. You can experiment (at your own risk!).

Technical Specifications
Board / motor voltage	5 - 32V dc max.
Motor current	10A maximum (see documentation for full details)
Board dimensions	42W x 93L x 28H mm
Board connections	Screw terminal block
Product Format	Electronic Kit (KT ) or Assembled (AS) more
Documentation	User Manual Magazine Review