3142 - 12-Channel Infrared Relay Board with Remote Control

Remote control 12-channel infrared receiver relay board containing 12 independently controllable relays and a fully assembled hand held IR remote control (RC) unit with a range of up to 20 metres indoors.

Each relay can be turned on and off independently. The receiver board has two banks of 6 relays. These are broken into two groups comprising 8 relays in Group 1 and 4 relays in Group 2. Each group can be set to either Toggle or Momentary action. Buttons 13 and 14 are used to turn off all the relays in a group. See User Manual below for detailed information.

Each relay is rated to carry 5 Amps @ 45Vac/70Vdc max and have screw terminal block connectors. Receiver unit is built on a high quality DSPTH PCB.

Technical Specifications
Relay Board Receiver
Power	Regulated 12Vdc (Order Code PSU445 is suitable)
Current Consumption	400mA max (40mA standby plus 30mA per active relay)
Output	12 x SPDT Relays
Maximum Output Resistive Load	5 Amps @ 230Vac max. per relay (Relay Datasheet)
Relay Connections	NO, NC, C (Relay FAQ)
Dimensions	112 x 122mm
Fixing Holes	4 x M3
Board Connections	Power: 5.5 x 2.5mm DC socket Relays: Screw terminal blocks
IR Code Protocols	Holtek HT6221/HT6222 Encoders (Table 4, Page 8, Key Codes K1, K2, K5-7, K9-11, K13-15, K21-23)
Remote Control Unit
Power	2 x AAA batteries (Order Code 656.013)
Range	20 metres (indoors)
Dimensions	130Lx50Wx25H (mm)
Product Format	Electronic Kit (KT ) or Assembled (AS) more
Documentation	User Manual

• Additional IR remote control units are also available separately (Order Code IRRC14 below) and replacement IR Receiver module PIC1018SCL from our Components page.
• A Remote Control and Decoder IC Pack similar to those used in this product can also be purchased separately as kit 3092