3133 - 10-14V PIR Motion Detector Module

This fully assembled 12V PIR Motion Detector module is just 27mm square and uses the latest SMT. It is similar to the 3076R PIR detector module that we sell but with the following differences:

• 3133 accepts a higher 10-14Vdc supply; 3076R operates on 4-12V
• 3133 output is active low, open collector; 3076R is active high output, open collector
• 3133 is 27mm x 27mm; 3076R is 25mm x 35mm
• 3133 has 3 pins directly off the Board Dimensions:; 3076R has a 50mm cable
• 3133 can be used with our 3156 relay board or 3141 timer board; 3076R can be used with our CT0004, 3156 or 1168 relay boards or 3141 timer board

Supplied fully assembled with Fresnel lens and ready to use (picture above shows two units - one with lens removed).

Technical Specifications
Power supply	10-14V dc
Operation current at 10-14V	600uA
Standby current	400uA
Output voltage	0.2V
Output duration	0.5 seconds minimum
Lens Angle (degrees)	100H x 60V
Lens diameter	24mm
Module dimensions	27 x 27 x 18 mm
Product Format	Assembled (AS) more
Documentation	Datasheet