3123 - ATMEL 89 Series Programmer
Simple-to-use,
low cost yet powerful programmer for the ATMEL 8051 family of microcontrollers.
It will Program, Read and Verify Code Data, Write Lock Bits, Erase and Blank
Check. All fuse and lock bits are programmable.
This programmer has intelligent onboard firmware and connects to the
serial port. It can be used with ANY type of computer and requires no
special software. All that is needed is a terminal/communications
program which all computers have. 5 LED's are used to indicate
programmer status.
Devices Supported
It supports the following ATMEL microcontrollers:
89C1051, 89C2051 and 89C4051
89C51, 89LV51
89C52, 89LV52
89C55, 89LV55
89S8252, 89LS8252
89S53, 89LS53
87F51, 87F52 (otp)
NB If a device is not specifically listed above it is not supported
by this programmer e.g. 89C55WD is NOT supported
Software
Programmer does NOT require special software other than a terminal emulator
program (built into Windows as Terminal or HyperTerminal) and can be used
with ANY computer and ANY operating system. Or use our
free Terminal program.
Need More Information?
Additional Items Required
- Power Supply Options: 16-18Vdc (Order Code
PSU010
or PSU020)
- M-F Serial Port Lead (Order Code LDC441)
- Supplied as standard with a 20 and 40 pin DIL IC socket. Optional
20-pin ZIF socket (Order Code ZIF20) and 40-pin
Wide ZIF socket (Order Code ZIF40W) can be
used in place of the standard DIL socket supplied for maximum ease of
use.
- ATMEL Microcontrollers Chips - See our
Electronic Components page
Kit Form or Assembled?
- Available in Kit Form (KT
)
only
more
