3115v2 - 1W + 1W Stereo Amplifier Module (LM386)

Uses two LM386N-1 power amplifier IC's for a stereo version of our popular kit 3017 amplifier and has a single dual gang volume control potentiometer.

Ideal for Walkman and other battery powered items. Features independent volume control on each channel and on-board jumper to change between a gain of 20 or 200. Speakers (not supplied) must be rated 3W minimum.

Technical Specifications
Power Supply	4 -12Vdc supply (e.g. Order Code PSU446)
Current consumption	200 – 500 mA max.
Idle current	~ 10 mA
Power Output	> 1 Watt max. @ 8 ohms, 12V DC ~ 0.4 Watt RMS cont. per channel
Output impedance	8 - 32 Ohms
S/N ratio	> 80 dB, (>90dBA) G = 20 > 60 dB, (>70 dBA) G = 200
THD	< 1 % @ 400 mW, 8Ω,12V DC < 0.2 % @ 1Volt RMS, 8Ω, 12V
Freq. response	~ 40 Hz to 100 kHz, 8 ohm < 20 Hz - 200 kHz, 32 ohm, G=20
Gain	x20 (26 dB) OR x200 (46dB)
Sensitivity	> 100 mV, G=20 > 10 mV, G=200
Input Z	~ 10 k ohm
Fixing holes	4 x M3 @ 58 x 30mm centres
Board Dimensions	62 x 35 mm
Board Connections	Solder pads
Control Knob	KB0561
Product Formats	SELF-ASSEMBLY Electronic Kit (KT ) or PRE-ASSEMBLED Electronic Module (AS) more
Documentation	User Manual LM386 Data Sheet