3106 - 50W Mono Hi-Fi Power Amplifier (TDA7294)

High power, hi-fi quality class AB audio amplifier module using a TDA7294 IC. This amazing little IC was designed for use in high quality hi-fi applications and has very low noise and distortion, wide bandwidth and good output current capability.

It provides an impressive 50W RMS into 8 Ohm or 82W RMS into 4 Ohm with only 0.1% THD.

Mute and Standby are brought out to connection pads on PCB. IC has internal short circuit and thermal protection, so is quite robust.

Space is provided on the PCB for mounting a 1.4°heatsink (not provided).

Can be combined with power supply module CFS007 or kit 3186 with a suitable mains transformer.

All components including IC insulation bush, screws, nuts & washers and TO-3 silicon-impregnated insulating washer are provided. Heat sink, speaker, cables and ±30V power supply not provided.

Technical Specifications (±30V supply)
Supply Voltage	±24 - 36V (see documentation for details)
Power Supply	kit 3186 with a suitable mains transformer
Input Sensitivity	1.3V (50W into 8 Ohm)
Input Impedance	10K Ohm
Freq. Response	16Hz - 100KHz
Slew Rate	10V/uS
Output Impedance	4 - 8 Ohm
Output Power	50W into 8 Ohm (0.1%THD) 82W into 4 Ohm (0.1% THD)
S/N Ratio	105dBa (1W/8 Ohm)
THD (40W into 8 Ohm)	0.002% (1kHz) 0.04% (20Hz - 20kHz)
Board Dimensions	84x83mm (heatsink area of PCB is 37x83mm but can overhang if required)
Board connections	Solder pads
Product Formats	SELF-ASSEMBLY Electronic Kit (KT ) or PRE-ASSEMBLED Electronic Module (AS) more
Documentation	User Manual TDA7294 IC Data Sheet Amplifier Power Supply General Advice