30A63 - 20 Second Message / Sound Recorder Module
Small, low cost, ready assembled voice/message recorder based around a COB
PCB.
It is ideal for model enthusiasts as it is so small and lightweight. The
message or sound is stored in non-volatile memory so is retained even when it
is turned off. You can erase and record a new message as many times as you like.
Features
- Non volatile flash memory technology
- No battery back up required
- User friendly, easy to use operation
- 2-keys operation, Record and Play
- Low power consumption
- LED to indicate recording
- Built-in condenser microphone
- Automatic power down
- 5V Operation
- Can be used with our 1W audio amplifier (Order Code
3017)
for greater sound levels.
Press PLAY button to play message once; press
again during playback to stop; or hold down for looped playback (with a 1 second
pause). 20 seconds of audio can be recorded at the factory set sampling rate
of 6.4KHz but up to 30 seconds record time (at 4.0KHz) can be achieved by simply
changing one resistor.
| Technical Specifications |
| Supply |
Regulated 5Vdc (4.5V Min, 6V Max) (Order Code AS3060-05)
- DO NOT EXCEED 6Vdc! |
| Operating Current |
25mA typical (no load) |
| Standby current |
5uA typical (10uA max.) |
| Storage capacity |
20 seconds @ 6.4KHz (standard setup) |
| Output |
8 Ohm speaker (Order Code 4047) |
| Board Dimensions |
34x23mm |
| Product Format |
Fully assembled module
more |
| Documentation |
 User
Manual |
