3068 - 1.5-30Vdc/1.5A Regulated Variable Power Supply

This kit will provide a regulated, variable 1.5 - 30Vdc/1.5A power supply from an unregulated input by using the popular three pin LM317T regulator. You can select any voltage between 1.5 to 30Vdc using the onboard potentiometer*.

Either AC (25Vac maximum) or DC input (35Vdc maximum) can be connected to the kit via the jack socket or terminal block. The input voltage can be from either a transformer or unregulated plug pack (not supplied).

* The input voltage needs to be 2-3V above the required output voltage for proper operation and with a current rating sufficient for the current to be drawn which is a maximum of 1.5A.

The kit is supplied with a heatsink, 2A bridge rectifier, smoothing capacitors, potentiometer, PCB mounted ON/OFF switch, input/output screw terminal blocks and an input jack socket.

Technical Specifications
Supply	5 - 25V ac max or 5 - 35V dc max (see User Manual for details)
Output Voltage	1.5V to 30Vdc (see User Manual for details)
Output Current	1.5 Amps max.
Board Dimension	~ 50 x 40 x 25mm
Enclosure	WCAH2853
Board Connections	Screw terminal blocks & 2.5mm power socket
Product Formats	SELF-ASSEMBLY Electronic Kit (KT ) or PRE-ASSEMBLED Electronic Module (AS) more
Documentation	User Manual