Ideal
for monitoring door opening or movement past a point. Uses a matched pair
of transmitter/ receiver transducers operating at 40KHz to reliably detect
movement 3 - 7 metres away. Circuit is crystal locked for maximum efficiency.
Transducers are mounted on a separate PCB for remote mounting.
Adjustable trigger sensitivity. Auto Reset (after ~ 0.3 Sec) or Latched On output options. An LED lights when the circuit is triggered.
A 12Vdc output pulse is available to drive small DC loads (up to 50mA) like a buzzer, siren, relay (e.g. Order Code 1168), opto-coupler (e.g. MOC3021),etc. Designed for indoor use.
| Technical Specifications | |
|---|---|
| Power Supply | 12V dc (battery or PSU445 with connector 778.106) |
| Current consumption | ~ 16mA standby, 25mA active (no load) |
| Detection Range | ~ 3 - 7 metres for best results |
| Output Modes | Auto Reset (after ~ 0.3 Sec) or Latched On |
| Output | 12Vdc Pulse |
| Output Load | 50mA max. |
| Tx Board Dimensions | 50x70mm |
| Rx Board Dimensions | 12x70mm |
| Board Connections | Solder pads |
| Product Format | Electronic Kit (KT
|
| Documentation |
|
Please see our Electronic Security page for more products like this
![]() |
||
Save money on postage by ordering online |
|
|
Electronics Specialists Since 1993
|| Offers |
News | Contact
Us | Ordering |
Newsletter |
Catalogue |
Search |
|
||
|
|
Order before 2pm for same working day despatch
|
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
||
|
|
Browse By Category |
Electronic Kits, Projects & Hardware Superstore
|

