1132 - Super 3-Channel Wireless Music to Light Effect, 230Vac Mains

Offers very impressive light effects thanks to very good channel separation between the low, medium and high frequency signals. Each of the three channels can drive mains voltage loads of up to 1000 Watts.

Easily connects to any audio amplifier with 1 to 100 Watts output power or other suitable audio signal. Uses three opto-couplers to completely isolate the mains voltages from the audio source.

Input sensitivity is adjustable. An onboard transformer provides power to the DC control circuitry.

Technical Specifications
Operating voltage:	230Vac/50Hz Mains
Power output per channel	1000W (peak) @ 230Vac mains
Input signal level	2.5V to 28V AF
Circuit power consumption	4VA AC
Input impedance	500K Ohm
Filter frequency responses	LOW: 10 Hz - 160 Hz MIDDLE: 350 Hz - 850 Hz HIGH: 1.8 kHz - 12 kHz
Board Dimensions	102x112mm
Board connections	Solder posts
Product Format	Electronic Kit (KT ) only more
Documentation	User Manual

• WARNING! This project kit operates at 230Vac mains voltage. It's construction, testing and use should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Kit must be fitted into a suitable enclosed box before operating. more